|
Description?G
Stable
welding can be performed with good us-ability and
welding ability . Due to more Mo content than that of
C-316, its corrosion resistibility is superior in dilute
sulphric acid. As weld metal with ultra-low carbon
content can be obtained, it shows good inter granular
corrosion resistibility.
Application?G
For welding of
19%Cr-13%Ni-Mo (SUS 317) stainless steel.
Typical weld
metal properties?G (Weld Metal Analysis)
Carbon
?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K 0.025
Manganese ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K. 1.29
Silicon ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K
0.57
Phosphorus ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K.
0.014
Sulphur ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K..
0.011
Chromium?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K.. 19.50
Molybdenun?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K3.50
Nickel ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K..
13.95
Niobium ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K. ------
Mechanical
properties:
Tensile Strength (Kg/mm2)
?K?K?K?K?K?K?K?K?K?K?K?K... 53.0 ~ 60.0
Yield Point (Kg/mm2) ?K?K?K?K?K?K?K?K?K?K?K?K?K?K...
----
Elongation (%) ?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K?K.. 30.0
~ 42.0
Reduction of Area (%) ?K?K?K?K?K?K?K?K?K?K?K?K?K?K..
----
Available diameter and recommended operating ranges?G
?@
| ?@ |
F.
& H. ?V fillet |
V.
& O.H. |
2.6 X300 m/m
3.2 X350 m/m
4.0 X350 m/m
5.0 X350 m/m |
50 ~
85 Amps
85 ~ 110 Amps
110 ~ 140 Amps
140 ~ 190 Amps |
45 ~ 80 Amps
70 ~ 90 Amps
90~130 Amps |
Type
of power?GA.C. or D.C.E.P.
Approvals?G
⃞ |
