Description¡G
CH-60 is a
low hydrogen type electrode for surfacing worn parts of
civil engineering, construction and mining machinery to
be used without machining. Deposited metal of about 600
Vickers hardness and martens tic structure provides high
toughness in spite of high hardness and excellent
abrasion resistance to medium impact.
Application¡G
Surfacing of track
rollers, crusher teeth, mill hammers and bucket lips.
Instructions for welding :
-
Preheating at more
than 150¢J is required.
-
A buffer layer with
low hydrogen electrode is required to surface
hardening metal or to deposit multiple layers.
-
Dry the electrodes
before use, at 300 ~ 350¢J for 60 minutes.
Typical weld
metal properties¡G (Weld Metal Analysis)
Carbon
¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K 0.60
Manganese ¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K 0.70
Silicon ¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K 0.65
Chromium ¡K¡K¡K¡K¡K¡K¡K..¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K.¡K¡K¡K 4.20
Molybdenum ¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K.. 0.60
Vanadium ¡K¡K..¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K.. ----
Tungsten ¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K¡K. ----
Hardness of
weld metal:
550 ~ 700 V.H.N. ( HRC: 55
~ 60 )
Available diameter and recommended operating ranges¡G
¡@
¡@ |
F.
& H. ¡V fillet |
¡@ |
3.2 X350 m/m
4.0 X400 m/m
5.0 X400 m/m |
90 ~ 120 Amps
140 ~ 180 Amps
190 ~ 240 Amps |
|
Type
of power¡GA.C. or D.C.E.P.
Approvals¡G |